Comments on: Mercedes Camshaft Postion Sensor

By: capt jeff

capt jeff — Thu, 01 Feb 2018 21:07:23 +0000

xclnt article- thanks!

By: Stan

Stan — Mon, 11 Dec 2017 05:59:08 +0000

In my scanner code p0012 what Does that mean and what is the cause and how do I fix the problem thx

By: Kevin calvo

Kevin calvo — Sun, 06 Aug 2017 02:28:33 +0000

How many camshaft sensor 2006 cls 500

By: Bob Clancy

Bob Clancy — Sun, 30 Jul 2017 19:19:49 +0000

We have a 2013 MB GL 350 Blue Tec. Dashboard “check engine” light came about 2 months ago. We had it checked by MB and they told us they could find nothing wrong. However, they suggested that we possibly consider replacing the main sensor for $1300.
2 days ago we lost power, the turbo wouldn’t kick in and the engine began to skip. The following day the engine light came on and the turbo skips and works occasionally.
We are on vacation, called the MB dealer and they can only see us in a week.
What do you think it could be and will it hurt to drive it until they will take it in for servicing. We have no other means of transportation

By: Adam williams

Adam williams — Sun, 30 Jul 2017 03:49:43 +0000

I have replaced both Sensors on my 2013 C250. I also replaced my ignition coils and spark plugs. The car still starts roughh! Ang ideas? The check engine light was on and the code was faulty Cam Shaft Sensor, bank 1. Any ideas as to what I do next?

By: Mercedes Medic

Mercedes Medic — Wed, 08 Mar 2017 01:07:10 +0000

In reply to yolanda lopez. If you had a proper scanner you will be able to test any of them. Also check the fault codes. The fault code may point you to the sensor that needs to be replaced. Driver side / left is bank one. Passenger side is bank two. Then you could have front or rear depending on the code.

By: yolanda lopez

yolanda lopez — Wed, 01 Mar 2017 21:09:50 +0000

There are 3 or 4 camshaft sensors in a 2007 MB E550. How do you know which one to replace.