Comments on: Mercedes – 722.9 7G-Tronic Valve Body & Conductor Plate – Must Read

By: abdulazeez baba

abdulazeez baba — Thu, 08 Feb 2018 15:28:21 +0000

My CLS500 2006 is showing ABS and ESP error while the steering is also stiff. This started recently when i changed the VGS (conductor plate). the workshop is finding it difficult to rectify this fault

By: Mark

Mark — Fri, 17 Nov 2017 21:49:43 +0000

I’m told by a MB shop that the front carpet need to come up for valve body replacement. Is this so.

By: Jameela Frierson

Jameela Frierson — Tue, 26 Sep 2017 19:46:49 +0000

Just purchased my 2006 CLS 500.w/ 72k miles. I havent had the car for 3 mos and I have already replaced the suspension. Lost speed while driving. Took into dealer just to find out I need a new valve. My extended warranty will not cover the Transmission Valve because its listed as a Technical Service.

By: Robert Dunbar

Robert Dunbar — Wed, 26 Jul 2017 23:12:34 +0000

Want to order 722.9 7 plate

By: henry

henry — Thu, 13 Jul 2017 23:41:54 +0000

my 2005 e500 wagon was doing all this stuff in “sport” – I then put the transmission on “comfort” – all is well – how long before “comfort” craps out (I’ve 118,000 on car)?Dealer wants $1800 to repair…

By: Asif Sohail

Asif Sohail — Wed, 05 Jul 2017 06:52:06 +0000

I have similar problem and fault showing is “the internal electrical check of component Y3/8Y5 (B 1 Brake control solenoid valve (VGS) has failed.

By: Mercedes Medic

Mercedes Medic — Wed, 19 Oct 2016 02:30:37 +0000

In reply to Charlie Smith. What were the codes and the diagnostic results?

By: Charlie Smith

Charlie Smith — Sun, 09 Oct 2016 09:00:56 +0000

This is exactly what I am experiencing on my 2006 R320. Would this be the cause? It is booked in at a Mercedes repair shop to have a diagnostic check, fortunately I took out an extended warranty when I purchased the car 6 months ago. Any other advice?