Mercedes Blind Spot Assist Inoperative

Mercedes Blind Spot Assist is a safety feature that warns the driver if another car is in the blind spot. This feature has been optional in many Mercedes-Benz models since early 2010. This guide will look at some common problems with Mercedes blind spot assist and why you may get a warning message such as “Blind Spot Assist Inoperative” or “Blind Spot Assist Currently Unavailable. See Operator’s Manual”

Blindspot assist Inoperative Message

It is not uncommon to get a blind-spot assist that has been deactivated warning on the dashboard. Typically, this happens during heavy rain. You may also get several other warnings on your dashboard, including:

• Pre-Safe Functions Limited
• Active Lane Keep Assist is Unavailable
• BAS and ESP lights on

The most common causes that trigger  Blind Spot Assist Unavailable  are:

• Heavy rain
• Inclement weather, including snow and fog
• Extremely high temperatures
• The radar sensors in the rear bumper are dirty
• Driving too close to lane crash barriers or dividers
• Driving next to a truck for an extended period
• Interference from other equipment or nearby transmissions (TV and radio stations)

In addition to the message on the instrument cluster, you may also notice the yellow triangle on the side mirror staying on.  If you are expecting Blind Spot Assist problems, find a safe location where you can stop and restart the vehicle.

Troubleshooting Mercedes Blind Spot Assist

Avoid driving through water puddles if you are driving in severely inclement weather. Wait for the rain to stop, restart the car, and check if that reset the warning light. The system should reset independently; generally, there is no need to worry. Unless the blind spot system remains disabled the next day or this problem happens frequently.

If you are getting an error for blind spot assist inoperative every time it rains, you have a problem that you need to address. The blind spot system is not supposed to turn off every time it rains, but unfrequent malfunction is common.

If the blind spot assist remains disabled, check fuses. If the fuse has not blown, check the following:

Water in Radar Sensor

The most common problem is that the sensor can get damaged by water. If so, the blind spot assist sensors behind the rear bumper must be replaced. When the blind spot radar sensors in the rear bumper fail, the turn signals may also stop working. If you are getting a blind spot inoperative on your dashboard every time it rains, remove the radar sensors on the rear bumper and ensure they are properly sealed. Water may be entering the radar sensors, triggering the message on the dashboard.

Sometimes, when the blind spot assist stops working, the wiper blades may also stop functioning. If you are experiencing these two problems, check the fuse for the wiper blades. Most likely, the fuse has blown. Once you replace the fuse, you should also gain access to the radar sensors in the rear bumper and inspect them. Make sure the radar sensors are completely sealed. Water entering these sensors can blow the wiper fuse because the same circuit protects them.

Dirt on Radar Sensor

Dirt on the radar sensors can prevent the blind spot assist from working properly. Remove the sensor and clean it if necessary.

Steering Angle Sensor

Another issue that makes the blind spot assist inoperative is the steering angle sensor mounted in the steering column. This sensor determines the position of the steering wheel. If it fails, the blind spot assist cannot get data and determine the steering wheel’s position.

Towing

If you tow a trailer or another vehicle, you may get  “Blind Spot Assist Currently Unavailable. See Operator’s Manual”. The system should be back to normal operation once you remove the trailer. While you have a trailer attached, do not rely on the blind spot assist system, but always check the blind spots before you change lanes.

Buy Mercedes Blind Spot Sensor

(eBay Link)Replacement Mercedes-Benz blind spot radar sensors can be purchased from Mercedes-Benz dealers or online retailers.

Click here to check prices on Mercedes Blind Spot Radar Sensor online (eBay Link).

How Does Mercedes Blind Spot System Work?

First, we need to understand how the system works. Radar sensors installed on the rear bumper detect vehicles in the blind spot areas. The radar sensors are behind the bumper. They are not the same as the parking assist (ultrasonic) round sensor you see. When a car is detected, Blind Spot Assist will warn the driver via the triangle in the side mirror. If the Blind Spot system detects that you are getting too close to the other car, it will apply the brakes on one side of the car to move you away from danger. Blind spot assist will only apply brakes if you are about to get into an accident, such as when ignoring the warning or trying to change lane when another car is next to you. If you are a careful driver, hopefully, you will never experience blind spot assist in action.

You should always check the blind spot when changing lanes.  It is important to understand that the Mercedes Blind Spot system works at speeds over 20 mph. Blind Spot Assist does not work if you travel less than 20 mph.

Also, remember that motorcycles may not be detected, or if they are, they may be discovered too late. Radar sensors are installed on the front bumper and front grill, but those sensors are not used for the Blind Spot system but for Distronic only.

It also does not detect vehicles that are traveling significantly faster than you. Blind spot assist may not identify other cars if the lanes are very wide.  That’s why the yellow warning light on your side mirror may stay on when driving slowly. The yellow triangle on the side mirror should turn off once your speed is over 20 mph.  Keep in mind that blind spot assist does not work when backing up. Blind spot assists monitor 10 feet behind the vehicle to the sides.

How to turn off /on the blind spot assist

If you will tow a trailer or another vehicle, turn off the blind spot assist. To do so, you can use the buttons on the steering wheel until you see the option for Blind Spot Assist. Enter this menu and turn it off using the OK button on the left side of the steering wheel.

What Scanner Can I Use to Diagnose Blind Spot Assist Problems on Mercedes-Benz?

If you’re experiencing problems with your Mercedes-Benz, a YOUCANIC full system diagnostic scanner can help you troubleshoot the issues. This advanced diagnostic tool can read and interpret the fault codes stored in your car’s computer system, providing detailed information about any problems with the engine, transmission, brakes, or other critical systems.

 

The YOUCANIC scanner can also perform diagnostic tests on various systems, including the ABS, airbag, and steering systems, to help pinpoint the root cause of any issues. With this information, you can make more informed decisions about repairs and maintenance, saving time and money on costly repairs.